Benchtop Tanks
Now days Benchtop tanks have become an essential cleaning tool used in so many different industry sectors. From removing micro contaminants found in university lab research to disinfecting every day medical instruments through to cleaning oil and grease embedded on small engineering parts.
The application of Sunflower Benchtop Tanks is endless.
Check out our range of stainless steel ultrasonic benchtops. If you require a custom built benchtop, please contact us.
Brief introduction
-
Low cost ultrasonic cleaning of parts and equipment
-
Used to remove most contaminants with the proper cleaning agent
-
Oil, Coolant, Metal Chip and Fines Removal
-
For cleaning metal parts and most other precision cleaning
-
Parts cleaning, injection mold cleaning, ultrasonic degreasers, etc.
-
Excellent ultrasonic performance
-
Tank capacity comes from 2-30L
Ultrasonic Cleaning can offer:
​
-
Non-directional cleaning - cleans where the sound and solution go
-
Reduced or eliminates the need for disassembly
-
Consistent results - non-operator dependent
-
Non-contact cleaning - only the soil is removed, not the substrate
-
High efficiency - cleaning multiple parts at one time
SEAMLESS SETUP
ENERGY EFFICIENT
BUILT TO LAST
ULTRASONIC BENCHTOP TANKS
UB-50
Example use: Professional ultrasonic cleaning of jewellery and eyeglasses. Built-in timer
Typical applications
​
Jewellery: Earrings, Necklace, Rings, Bracelets and Diamonds.
Glasses & Timepieces: Glasses, Optical Lenses, Contact Lens Accessories, Watch Chains and Waterproof Watches.
Commodities: Tattoo Guns and Tubes, Electric Shaver Heads, Razor Blades, Dentures, Combs and Toothbrushes.
Stationery: Pen-heads, Printer heads, Inkjet Cartridges and Seals.
Metal Articles: Ancient Coins, Badges, Valves, Machine Nozzles, Electronics Components and Mechanical Parts, Forks, Knives, Spoons and Other Small Silverware etc.
Others: Baby nipples and feeder bottles, fruit, vegetables.
UB-100
Example use: Dental and medical instruments, cleaning eye glass lens and jewellery
.png)
Typical applications
​
Jewellery: Earrings, Necklace, Rings, Bracelets and Diamonds.
Glasses & Timepieces: Glasses, Optical Lenses, Contact Lens Accessories, Watch Chains and Waterproof Watches.
Commodities: Tattoo Guns and Tubes, Electric Shavers Heads, Razor Blades, Dentures, Combs and Toothbrushes.
Stationery: Pen-heads, Printer heads, Inkjet Cartridges and Seals.
Metal Articles: Coins, Badges, Valves, Machine Nozzles, Electronic Components and Mechanical Parts, cutlery and Silverware etc.
Laboratory: Scientific Research, Mixing, Cell Disruption, extraction, pharmaceutical Sonochemistry
UB-150A
Example use: Multi chambered tank or lab research along with dental and medical instrument cleaning
The standard machine is with 40khz frequency. If need, 28khz, 80khz, 120khz, etc. are also available. Please choose the suitable frequency according to the cleaning objects.
The range of ultrasonic applications in the lab is varied. Cleaning, removal, homogenization, degassing or emulsification.
Our ultrasonic cleaners and cleaning agents are thus optimized for typical laboratory tasks and suited to finding problem solutions or to achieving reproducible test results.
UB-150B
Example use: Vinyl Disc LP Cleaner. Also suitable for small arms cleaning 6.5L 40KHz 120KHz Optional
UB-150B-6.5L ultrasonic washing machines are simple to operate yet give outstanding results.
​
-
Fill the stainless steel tank with 6 liters (1.6 gallons) of aqueous ultrasonic cleaning solution formulated for the parts being cleaned. Turn on the unit and the heater, allowing it to operate without a load for approximately 5 minutes. This degasses new solutions, an important step for effective ultrasonic cleaning action.
-
Place parts to be cleaned in the furnished mesh parts basket, immerse in the cleaning solution and set the digital timer for 20 minutes. (You will soon learn how much time is required based on what is being cleaned.)
-
At the conclusion of the cycle remove the basket, inspect the parts, rinse and lubricate if necessary then reassemble.
A good practice is to skim off grease that floats to the surface, and to replace the solution when it becomes dirty and cleaning time extends. Dispose of both according to local regulations, then clean the tank following the manufacturer’s recommendations before refilling with a fresh solution.
UB-200
Example use: Medical instruments sterilizer, Cleaning metal and plastic machine parts, Electronic components etc.
.png)
Ultrasonics is ideal for cleaning complex components. With its unique ability, ultrasonics will remove all the contamination from instruments used in the Medical industry. Ultrasonics cleans and sterilizes far above all medical cleaning standards allowing for fast and effective cleaning every time
Features:
1. Ultrasonic power: 0-100% adjustable
2. Time setting: 0-30min or 24 hours continuous working
3. Heating: 20-80℃ adjustable
4: Ultrasonic frequency: 28 kHz or 40 kHz
5: Material: 2mm thickness SUS304 rust proof tank
6: Improved PCB design for stable and durable industrial use
7: More stronger and uniform ultrasonic wave
8: Comes with stainless steel SUS304 basket
UB-400
Example use: Precision ultrasonic cleaning of Printed Circuit Boards and other delicate electronic parts
-
Removes flux, solder paste and other residues
-
Zero damage to delicate electronics
-
Lowers QC rejects, increases product reliability
-
Uses eco-friendly chemicals
-
Penetrates into tight spaces with complex geometries
-
Superior to spray washing
-
Maintenance cleaning of dispensing nozzles and print heads
UB-500
Example Use: Ultrasonic cleaning of auto and motorcycle engine parts Dual frequency 28 -40 KHz. and heat controller
Car service: Flushing carburettors, injectors, fuel filter mesh cleaning, individual parts, assemblies and entire blocks
Regardless of the source of the dirt or contamination, Sunflower Ultrasonics are designed to accommodate a wide variety of uses in diverse industries. Fast, effective and efficient, our machines will allow you to clean virtually any type of part or component.
​
The following is just a short list of the many different types of items that have been cleaned using our systems.
-
Automotive (Car, Truck, Motorcycle)
-
Aviation (Helicopters, Aircraft and Ground Support)
-
Personal Boat & Marine
-
Injection Molds
-
Restaurants, Bakeries & Kitchens (Oven Filters, Burners, Pots, Pans, Utensils)
-
Machines of All Types
-
Tools, Nuts, Bolts
-
Extrusion and Deburring
-
Almost anything made out of metal (ferrous and non-ferrous), plastic, vinyl, and wood.
WORLDWIDE SHIPPING
